They give a bright sharp image and very good colour fidelity. There are many applications where these cameras are the ideal tool for the job. Many low cost accessories are available such a video quad generators to display images from 4 different cameras and cross-line video generators. This range of cameras includes several colour and monochrome cameras with CS mount and back focus adjustment and are therefore suitable for fixed lenses, zoom lenses and microscopes.
The New WatHX camera offers excellent light sensitivity and low noise making it ideal for extreme low light applications and astronomy. We also. Do not install the WATS2 in a position subject to direct.
Sunlight shinning directly onto the WATS2 lens can cause. Select a stable place for installation of the WATS2. Use a support of durable strength around an installation. Do not move the WATS2 with the cables connected. Before moving the WATS2, always remove the video.
After installing into main equipment, if the WATS2 is. If any of the following problems occur when using the WATS2,. An optimal picture cannot be obtained, after checking that all the cables. Smoke or any unusual odor emerges from the WATS2. An object becomes embedded or a quantity of liquid seeps into the camera.
Anything unusual occurring to any equipment connected to the. Disconnect the camera immediately according to the following procedures:. Do not modify the WATS2. A modified camera may not. Using the contents figures below, check to make sure all parts are present.
Dirt, water or oil deposits on the CCD will cause an unclear picture on the. Attach the lens cap to protect the lens and CCD from. Use the optional DC plug if the shape or polarity of the DC plug of the power.
Be careful no to touch the other terminal while wiring. Protect the wiring portion by using insulation tape. If the above care and attention is not. Before connecting the auto-iris lens, please make sure that the pin.
CS-mount lens. If the monitor has an S-terminal, high resolution imaging is possible by. A monitor with more than TV lines is recommended. Confirm that the power adaptor is not. When a picture cannot be obtained on the monitor, or a. Iris Level Adjustment for DC auto-iris lenses only. No change will occur if a video iris lens or manual. Shutter mode is set to 8 upon shipment. Automatically selects the shutter speed according to.
For electronic iris reducing the flickering phenomena. Previous Page. Next Page. Use the optional DC plug if the shape or polarity of the DC plug of the power
0コメント